Skip to content
Quiet Voice Audio

How to remove background noise in Audacity, step by step

Published November 20, 2026

To remove background noise in Audacity, select a few seconds where only the noise plays, open Effect, then Noise Removal and Repair, then Noise Reduction, click Get Noise Profile, select the whole track and apply the effect with moderate settings. Below we explain each setting, the mistakes that ruin a voice, and what to do when the built-in effect is not enough.

What Audacity's Noise Reduction can and cannot fix

The effect works by learning the noise. You show it a stretch of the recording where nobody speaks, it measures how loud each frequency of that noise is, and then it turns those frequencies down across the whole track wherever the voice is not covering them.

That method suits constant sound: computer fans, air conditioning, tape hiss, the steady buzz of electronics. According to the Audacity manual, it is not meant for single clicks and pops or for noise that keeps changing, such as passing traffic or an audience. It also struggles when the noise is almost as loud as the speech or sits in the same frequency range as the voice.

A quick way to judge your file: listen to a pause. If the background sounds the same from start to finish, Noise Reduction will likely help. If it rises, falls and moves around, expect only a partial result.

How to remove background noise in Audacity: the full process

  1. Find a clean stretch of noise. Zoom in and select a section with no speech, breathing or music, only the room. The manual asks for at least 2048 samples, about 0.05 seconds at 44,100 Hz, and says a longer selection gives a better profile. One or two seconds is a comfortable target.
  2. Capture the profile. Choose Effect, Noise Removal and Repair, Noise Reduction, and press Get Noise Profile. The window closes; Audacity now remembers that noise.
  3. Select what you want to clean. Usually that is the entire track, so click the track or press the select-all shortcut.
  4. Open the effect again and set the sliders. Start from the defaults: Noise Reduction 6 dB, Sensitivity 6, Frequency Smoothing 6 bands.
  5. Preview a spoken part. Use the Preview button on a section where someone talks, not on silence. Silence always sounds better after cleaning; the voice is what can get damaged.
  6. Check the Residue. Switch the Noise option from Reduce to Residue and preview again. You now hear only what will be removed. If you can recognize words in it, the settings are too strong.
  7. Apply. Return the option to Reduce and press Apply. Then play the result from the beginning with headphones.

Note that the profile is lost when you close the program. Each new session needs a fresh Get Noise Profile.

What each setting does

Noise Reduction (dB) sets how far the identified noise is pushed down. The manual advises using the lowest value that brings the noise to an acceptable level. Pushing it higher makes the background quieter but starts to eat into the voice.

Sensitivity decides how much of the audio counts as noise, on a scale from 0 to 24. Higher values catch more noise and more of your voice with it. Values that are too low leave behind short, tinkling tones that people call musical noise.

Frequency Smoothing (bands) spreads the reduction to neighboring frequency bands. It can soften those tinkling leftovers, but it may also blur a clear voice. For a strong voice over light noise, the manual suggests trying 0; if artifacts remain, try between 1 and 6 bands. Values below the default of 6 tend to suit music, higher ones suit speech.

A practical order is to raise Sensitivity until the noise is caught, lower Noise Reduction until the voice stops sounding watery, and only then adjust smoothing.

Common mistakes that make the voice worse

  • A profile that includes speech. If a breath or the tail of a word slips into the noise sample, Audacity learns part of the voice as noise and removes it everywhere.
  • Copying a tiny noise sample to make it longer. The manual is clear that repeating the same short block does not improve the profile, because the statistics stay the same.
  • Maximum settings in one pass. Strong values create a hollow, underwater sound. Two gentle passes with fresh profiles often sound more natural than one aggressive pass.
  • Treating hum like hiss. For mains hum or a single whistle, the manual recommends a Notch Filter first and Noise Reduction after it.
  • Cleaning after compression. Compressors and limiters raise the noise between words and change it over time. Reduce noise first, then level the volume.
  • Judging on laptop speakers. Small speakers hide both the noise and the artifacts. Check with headphones before you export.

Manual cleanup or an automatic tool: how they compare

ApproachWorks best forStrengthsLimits
Audacity Noise ReductionSteady hiss, fan or air conditioner noiseFree, full manual control, works offlineNeeds a clean noise sample; weak on changing noise, echo and music; profile resets each session
Notch Filter in AudacityMains hum or one steady whistleRemoves a narrow frequency with little effect on speechYou must find the exact frequency and its harmonics yourself
AI voice cleaner onlineMixed problems: noise, room echo, hum, music behind speechNo noise sample needed, separate controls per problem, video supportedNeeds an upload; the full file is paid
Better recording conditionsYour next recordingCleanest result, nothing to repairDoes not help files you already have

When Noise Reduction is not enough: Quiet Voice Audio

Some recordings have no clean pause to sample, or they mix several problems at once: a fan, a ringing room and a buzzing cable. That is where an AI cleaner trained on speech saves time. Quiet Voice Audio separates the voice from everything else without a noise profile, and it gives you five independent controls: Noise, Voice clarity, Echo, Hum and Background music.

  • Upload the original file, audio or video, and hear a free 30-second Original versus Cleaned sample before paying.
  • The Hum control checks for 50 or 60 Hz mains hum by itself, so you do not hunt for frequencies.
  • Video keeps its original picture; only the soundtrack is replaced.
  • A full file costs from $2.99, and uploads are deleted after 24 hours.

Before launch the Quiet Voice Audio team compared 11 open models on 40 test recordings using PESQ, STOI, SI-SDR and DNSMOS, so the defaults are tuned on real speech. To try it on your own recording, go to the page for removing background noise from audio and upload the file. You can still bring the cleaned WAV back into Audacity for editing.

How to record with less noise next time

  • Switch off fans, air conditioning and fridges in the room for the length of the take.
  • Bring the microphone closer to your mouth and lower the input gain. The voice gets louder relative to the room.
  • Record a few seconds of silence at the start. It gives Audacity an ideal noise profile if you still need one.
  • Keep laptops and phone chargers away from the audio cable to avoid buzz.
  • Soft furniture, curtains and a rug reduce the room echo that no noise filter removes well.

If the voice itself sounds dull rather than noisy, the cause is usually the microphone or its position; our article on why a mic sounds muffled covers that case.

Audacity noise removal: questions and answers

Where is Noise Reduction in the current Audacity menu?

Open Effect, then Noise Removal and Repair, then Noise Reduction. The same window is used both to capture the noise profile and to apply the reduction.

What are good Noise Reduction settings for voice?

Start with the defaults of 6, 6 and 6, preview on speech and check the Residue. Raise Sensitivity before Noise Reduction, and lower both if the voice starts to sound watery or robotic.

Why does my audio sound robotic after noise reduction?

That metallic, bubbly sound means the effect removed parts of the voice or left artifacts. Use a cleaner noise sample, reduce the dB value, and try a few bands of Frequency Smoothing.

Can Audacity remove echo?

Noise Reduction targets steady noise, not room reflections, so it does little for echo. Echo needs a dedicated de-reverb tool or better acoustics during recording.

Why does Audacity show an error when I click Get Noise Profile?

The selection is too short. Select a longer stretch of pure noise, ideally at least a second, and try again.

Can I remove background noise in Audacity from a video file?

Audacity edits audio, so you need to extract the soundtrack, clean it and put it back with a video editor. Quiet Voice Audio accepts MP4, MOV, MKV and WebM directly, which skips those export and import steps.

Try it on your file

Upload a recording and hear a free 30-second before/after preview.

Drop audio or video here

or

WAV, MP3, M4A, AAC, OGG, OPUS, FLAC, MP4, MOV, MKV, WebM · up to 1 GB and 10 minutes
You can also paste a file (Ctrl/Cmd+V).

No sign-up to try. Deleted after 24 hours.

Sign in to download

Sign-in is not available during the beta. Downloads work without an account.

Download the full file

    Secure checkout by our payment partner. Card, PayPal, Apple Pay, Google Pay.

    Related articles